You can choose when you want the Perfect Moose to make a noise and when not to. The use of alarm sounds can be very useful draw your attention when in full rush.

Sound when error ON

-> switch this button to ON when you want to hear a beeping sound every time the Moose wants to give you a warning. Warnings can be 'not enough milk', 'milk too hot', ... a warning image will always appear on the display to tell you what to do.

Sound when error OFF

-> switch this button to OFF when you DON'T want to hear a beep every time the Moose gives a warning such as  'not enough milk', 'milk too hot', ... a warning image will always appear on the display to tell you what to do.

Sound when steaming cycle ends ON

-> switch this button to ON when you want to hear a sound every time the Moose is done steaming. This can be handy to hear when moose is finished and your microfoam is ready. 

At the end of every steaming cycle, the touch display will always show an image telling you the microfoam is ready. 

Sound when steaming cycle ends OFF

-> switch this button to OFF when you DON'T want to hear a sound every time the Moose is done steaming and your microfoam is ready.

At the end of every steaming cycle, the touch display will always show an image telling you the microfoam is ready.

Sound when time to flush ON - recommended

-> Switch this button to ON when you want to hear a sound every time you need to flush the steam wand after a steaming cycle (by holding your finger on the touch display). 

For hygienic reasons, we highly recommend having this sound ON so you never forget to flush. A steam flush after each cycle is obligatory to continue with the next steaming cycle. 

Sound when time to flush OFF

-> Switch this button to OFF when you DON'T want to hear a sound every time you need to flush the steam wand.