Yes you can. Simply by adapting the texture and temperature settings on the smart Moose pitcher. 

Once set, texture and temperature of the microfoam outcome are consistent every time you steam milk with that smart pitcher. Want to change something? Same simple procedure to adjust...


Good to know | Texture (= density/thickness of the microfoam) and temperature can only be adjusted within the limits of top quality microfoam outcome, so there's no room for error.




If it is the very first time you use a new pitcher, follow this one-time set-up procedure.

If you want the steamed milk to be hotter for just 1 steaming cycle, touch the 'tap for extra hot' button on the touch screen of your device before steaming. 



Adjusting microfoam texture and temperature settings on a programmed pitcher


1. Make sure your Perfect Moose device is switched on and you see the standard starting screen as below.


2. Put the smart pitcher on the pitcher holder. Make sure the pitcher is empty and there is no milk in it. The following screen (example) will appear:




3. Gently tap 'Adjust recipe' on the touch display. The screen below will appear. 


First, adjust the texture of the microfoam by moving your finger along the slider. 

The more you move the slider to the left, the thinner/runnier the texture of the steamed m*ilk. The more you move the slider to the right, the thicker/denser the texture. 


Click on > in the right bottom corner to move to the second step (adjust temperature).



Second, adjust the temperature of the microfoam by moving your finger along the slider. The more you move the slider to the left, the colder. The more you move the slider to the right, the hotter the microfoam.

Default temperature is 64° Celsius for dairy and 62° Celsius for plant-based milks. 


Click on the SAVE icon to save the pitcher recipe settings. 



4. You're done! The pitcher is programmed, the adjusted recipe is set and you're ready to moose it up. 

Remove the pitcher from the pitcher holder to continue. 



Moose Tip | if you want to check which recipe is set on a pitcher, simply put the empty pitcher on the pitcher holder. The display will tell you which texture and temperature are set. 


Note for the installing technician | the option to adjust texture and temperature in the pitcher recipe settings is available as from software version 5310. In order to use this feature, 'Recipe Link Enabled' has to be activated upon the First Start Procedure or in the Settings Menu.