Planning

• Prepare the area where to replace the RFID reader.
  
• Stay organised while replacing the RFID reader
• Prepare an RFID reader :

Part number 10401

• Prepare the following tool :

• Screwdriver with nr 10 torx head

Procedure

• Remove the pitcher holder.

• Unscrew the RFID protective cap with the torx 10 screwdriver and put it aside.

• Remove the protective film.

• Unscrew the RFID board with your torx nr 10 screwdriver and tilt it backwards.

• Remove the connector carefully by pulling on the connector itself, not by pulling the wire.

• Take the new RFID board, connect, screw back in place, put the protective film on, screw the protection cap on and place the pitcher holder back.