REQUIRED TOOLS
- Screwdriver T10 Torx head
- Screwdriver T25 Torx head
- Allen key #5
PROCEDURE
- Remove the 4 Tx25 black screw caps on the side of the Jack back housing.
- Unscrew the 4 screws on the side of the Jack housing with a Torx T25 screwdriver.
- Remove the Jack housing (back) from the Moose by holding the housing with 2 hands.
- Lift the housing upwards and backwards.
 |  |
NEED TO REMOVE THE JACK HOUSING FRONT?
You can find the article to remove the Jack housing (front) by clicking here.
NEED TO CLOSE THE JACK HOUSING BACK?
You can find the article to close the Jack housing (back) by clicking here.