REQUIRED TOOLS

• Screwdriver T10 Torx head
• Screwdriver T25 Torx head
• Allen key #5
• &kg calibration weight
• Computer

REQUIRED PARTS

• Recipe-files (Version 1120)
• 13068 - µSD-card

BEFORE YOU START

Before you start, make sure the device is turned off and disconnected! Remove the Moose housing

PROCEDURE

• Remove the old µSD-card from the motherboard.
• Write all the recipe-files on the new µSD-card.
• Place the new µSD-card in the motherboard.
• Close the housing of the Moose
• Calibrate the load cell
• Go into the setting-menu. Select Customer profile "0" and adjust recipe to "ON"

• Go to the ready to steam screen by exiting the menu

• Program all your pitchers one by one by placing an empty pitcher on the pitcher holder and select "adjust recipe" to program the texture and temperature of the frothed milk/m*lk on the pitcher